​

​

​

- Applied Equipment : CUBICON Style (CUBICON Style, 3DP-210F)

* It does not apply to products other than CUBICON Style.

Firmware of CUBICON Style (3DP-210F) was updated to v1.7.2.
Receive attachment file to uncompress and use.

Please refer to the CUBICON Style / Cubicreator user manual and update it.
At Firmware Update, the firmware switch on the printer must be left.
After Firmware Update, move the firmware switch on the printer to the right and use it.
Style Firmware v1.7.2 is a normal operation if you use Cubicreator v2.5.2 or higher.

(Revision History)
> FW v1.7.2 : Cubi210F_V1.7.2 (180629).hex
• Improving the sensitivity of Z-axis sensors (the drop in Bed during Auto Tilt)
> FW v1.7.1: Cubi210F_V1.7.1 (180607).hex
• Modify other bugs.
> FW v1.7: Cubi210F_V1.7 (180515).hex
• Integration Ver due to Motor Driver change.
• Apply 5-point badminton and add 3-point 5-point badminton selection.
• Change User Temp to A100.
• Apply new UI Name.
• Modify other bugs.
> FW v1.5: Cubi210F_V1.5 (170207).hex
• Modify the Selfest error when running Preheat
• Improving output quality problems
• Replay Beep sound every 2 seconds in case of failure of CoolEnd Fan
• Bug Modification that Fan did not work during the Mold Fan manual control
> FW v1.4: Cubi210F_V1.4 (160825).hex
• Modify errors that change the Fan/LED setting value when power outage is turned on during output
• Other Bug Modification FW v1.3: Cubi210F_V1.3 (*).hex
• Modify some malfunctions of the menu's motion functions
• This Firmware was not posted on the web.
> FW v1.2: Cubi210F_V1.2 (160520).hex
- Improved PC and USB Connection Output Stability
- Modify Auto Leveling Bed Offset to be adjustable to
-100 ~ + 1,000um
• Interior Lighting on/Off Settings for Printers (Configuration>LED Lamp)
- Other Bug Modification
> FW v1.1: Cubi210F_V1.1 (20151214).hex
• Modify Auto Leveling Bed Offset to be adjustable to -100 ~ + 500um - Modify the Bed temperature to '0' after the output start.
• Error processing if X, Y, Z coordinates exceed the molding size
• Error Treatment for Cubicreator v2.5 Previous G-Code
• Modify the Filter Fan and Extruder Fan Control Scenario
• Other Bug Modification