​

​

​

-  Cubicon Single Plus, 3DP-310F

Caution!) This firmware works only Cubicon Single Plus.

1. Cubicon Single Plus’s Firmware is upated to v1.2.0

 * Single Plus firmware v1.2.0 shall be working with Cubicreator v3.1 or above versions.


2. How to update 3DP-310F (Single Plus) Firmware (by using USB memory stick)

* Please use USB memory stick
 

1. 1. Download the Firmware “Cubi310F_Vxxx.zip” and upzip 

​

     2. Make a folder hierarchy structure on root folder.* the folder structure must be same as follows 

             


     3. Go to “setting” in Cubicon 3D Printer and press “Firmware” and then “downlaod”

         * It is normal “100%” shall blinks many times and wait around 5 minutes.

     4. fter finishing firmware update, it automatically reboots. Go to “Information” and check the firmware version is well updated

     5. Go to “setting” ->  “initialize” and wait around one minute. after that please re-boot the machine by pressing power switch.

(Revision History)


> FW v1.2.1 : Cubi310F_V1.2.1(170216).zip


(Important Matter)



 - Communication Protocol was revised from v1.1.0 Firmware. Cubicreator v3.1 is aksed to use in order to connect Network.

 - Please use USB memory stick to update v1.2.1 Firmware.

    (Cubicreator Version and F/W Version might cause the problem while Firmware updating.

 - WiFi network Printing method is recommended assistance mean considering Data transmission.

 - v1.2.0 Firmware is containing multi-national language package (Korean, English, Chinese), so it's volume is a lot incresed.

   (It will take more time for updating.

(Improvement)

 - USB Memory file copy function stabilization

 - Auto Tilt Align performance improvement

 - When temperature is not reached to its target, start to print error modified

 - Cool-End Fan shall run when nozzle temperature is above 50 Celsius.

 - When press backward button after checking File information, the file position is remained & displayed.

 - Even print is done, Thumbnail will be displayed

 - other Bugs modified and stabilized