​

​

​

Cubicon Single Plus, 3DP-310F


Caution!) This firmware works only Cubicon Single Plus.


1. Cubicon Single Plus’s Firmware is upated to v1.2.0

 * Single Plus firmware v1.2.0 shall be working with Cubicreator v3.1 or above versions.

 

2. How to update 3DP-310F (Single Plus) Firmware (by using USB memory stick)

* Please use USB memory stick

 

             Download the Firmware “Cubi310F_Vxxx.zip” and upzip.

     2. Make a folder hierarchy structure on root folder.* the folder structure must be same as follows

              


     3. Go to “setting” in Cubicon 3D Printer and press “Firmware” and then “downlaod”​
         * It is normal “100%” shall blinks many times and wait around 5 minutes.

​

​

     4. fter finishing firmware update, it automatically reboots. Go to “Information” and check the firmware version is well updated.

​

     5. Go to “setting” ->  “initialize” and wait around one minute. after that please re-boot the machine by pressing power switch.