​

​

The fiirmware of Cubicon Style (3DP-210F) is updated to Version.1.2.

- Applied machine: Cubicon Style, 3DP-210F

It is not compatible with other machine except Cubcion Style.


(How to update the Firmware)

1) From the Cubicon Style machine,

2) Open the Cubicreator Software and click Setting at the top of menu ->Firmware Update to load the downloaded *.hex file.

3) Click the Start button in the Firmware Update dialog box.

​

4) After the firmware update is completed, run {Configuration>Initialize EEPROM} from the printer function menu.

This step updates the firmware values, as the old firmware values may be in conflict with the updated program, causing a printer malfunction.

**Caution: Make sure that the power to the PC or printer is not turned off, and do not disconnect the USB cable during a firmware update, as this may cause a printer problem.



**Firmware v.1.2 is properly operated with Cubicreator v.2.5.2+.

(Revision History)

> FW v1.2 : Cubi210F_V1.2(160520).hex

- Changed Autotilt Bed Offset Range to -100 ~ +1,000um.

- Add Internal ramp On/Off settings(>Configuration >LED Lamp).

- Modify other bugs.

> FW v1.1 : Cubi210F_V1.1(20151214).hex

 - Modified to adjust Auto Leveling Bed Offset from -100 ~ to +500um.

 - Modified the bed temperature to "0℃" after starting the printing.

-  If X,Y,Z-Axis goes beyond the build size, it will be errored.

-  Modified the synario of Filter Fan or Extruder Fan control.

-  Modified other bugs.