​

​

​

The fiirmware of Cubicon Single (3DP-110F) is updated to Version.2.2.

- Applied machine: Cubicon Single, 3DP-110F

It is not compatible with other machines except Cubcion Single.


1) Connect the PC with the printer using a USB cable.

2) Download the latest firmware file from the Cubicon homepage.

3) Open the Cubicreator Software and click Setting menu ->Firmware Update to load the downloaded *.hex file.

4) Click the Start button in the Firmware Update dialog box.

5) After the firmware update is completed, run {Configuration>Initialize EEPROM} from the printer function menu.

This step updates the firmware values, as the old firmware values may be in conflict with the updated program, causing a printer malfunction.

**Caution: Make sure that the power to the PC or printer is not turned off, and do not disconnect the USB cable during a firmware update, as this may cause a printer problem.



**Firmware v.2.2 is properly operated with Cubicreator v.2.5.2+.


(Revision History)

> FW v2.2 : Cubi110F_V2.2(160520).hex

- Improved the connectivity between PC and USB cable for stable printing environment.

- Changed Autotilt Bed Offset Range to -50 ~ +100um.


> FW v2.1 : Cubi110F_V2.1.0(151102).hex

- Improves the termination of printing due to the temperature error while printing. 

> FW v2.0 : CubiFW_V2(150612 Release).hex

> FW v2.0 : CubiFW_V2(150612 Release).hex

- Modified to be printed with TPU (Flexible Filament) material.

- Show the version of Main Board (It is not shown at the previous Hardware). 

- Display the file name of SD Card.

  : Sorted the file name from the lastest.

  : Display only *.hvs format among the file names from SD Card.

- Improved to show the estimated printing time calculated while slicing process(Applied for Cubicreator v.2+).

- Add User setting for Preheat; U01(TPU), U02.

- Improves the Autotilt for printing TPU Filament.

- Add the setting of Baudrate when connected to PC MAC OS installed via USB Connection.

- Improves the operation of Dial button.

- Change the temperature setting of Bed/Ext/Chamber.

   Bed = 40~120C, 0C(No Heating)

   Ext = 120~260C, 0C(No Heating)

   Chamber = 30~55C,0C (Non-Operation of Fan. Be careful of increasement of ambient temerature).

- Add Unloadiing process of some filament while paused or terminated.
- Compatible of Mold Fan and Filter Fan.
- Immediate implement of Pause function regardless of current temperature.
- Improves the malfunction of Stop and Pause manu.
- Improves the bug of sleep mode when Loading/Unloading process. 
- Improves the list bug in Sub-Folder of SD Card.

​

​

 ​