CUBICON, 3D Printer & AI Robotics Company
3D Printer
[Firmware] Cubicon Single FW v2.2
Writer : CUBICON 18-10-09 16:11
The fiirmware of Cubicon Single (3DP-110F) is updated to Version.2.2.
- Applied machine: Cubicon Single, 3DP-110F
It is not compatible with other machines except Cubcion Single.
1) Connect the PC with the printer using a USB cable.
2) Download the latest firmware file from the Cubicon homepage.
3) Open the Cubicreator Software and click Setting menu ->Firmware Update to load the downloaded *.hex file.
4) Click the Start button in the Firmware Update dialog box.
5) After the firmware update is completed, run {Configuration>Initialize EEPROM} from the printer function menu.
This step updates the firmware values, as the old firmware values may be in conflict with the updated program, causing a printer malfunction.
**Caution: Make sure that the power to the PC or printer is not turned off, and do not disconnect the USB cable during a firmware update, as this may cause a printer problem.
**Firmware v.2.2 is properly operated with Cubicreator v.2.5.2+.
(Revision History)
> FW v2.2 : Cubi110F_V2.2(160520).hex
- Improved the connectivity between PC and USB cable for stable printing environment.
- Changed Autotilt Bed Offset Range to -50 ~ +100um.
> FW v2.1 : Cubi110F_V2.1.0(151102).hex
- Improves the termination of printing due to the temperature error while printing.
> FW v2.0 : CubiFW_V2(150612 Release).hex
> FW v2.0 : CubiFW_V2(150612 Release).hex
- Modified to be printed with TPU (Flexible Filament) material.
- Show the version of Main Board (It is not shown at the previous Hardware).
- Display the file name of SD Card.
: Sorted the file name from the lastest.
: Display only *.hvs format among the file names from SD Card.
- Improved to show the estimated printing time calculated while slicing process(Applied for Cubicreator v.2+).
- Add User setting for Preheat; U01(TPU), U02.
- Improves the Autotilt for printing TPU Filament.
- Add the setting of Baudrate when connected to PC MAC OS installed via USB Connection.
- Improves the operation of Dial button.
- Change the temperature setting of Bed/Ext/Chamber.
Bed = 40~120C, 0C(No Heating)
Ext = 120~260C, 0C(No Heating)
Chamber = 30~55C,0C (Non-Operation of Fan. Be careful of increasement of ambient temerature).
- Add Unloadiing process of some filament while paused or terminated.
- Compatible of Mold Fan and Filter Fan.
- Immediate implement of Pause function regardless of current temperature.
- Improves the malfunction of Stop and Pause manu.
- Improves the bug of sleep mode when Loading/Unloading process.
- Improves the list bug in Sub-Folder of SD Card.